Other Makes parts for sale
Jensen Healey Flared fender moulds Moulds taken off 4 NOS $ 350
Huffaker Jensen Healey race fenders. These are light duty
moulds I intended to use for repair of like parts and to make new
ones, but never used and will never need. Will make whole
fenders mounting all the way to the bead and in the door jam.
Jensen Healey Flared fender moulds Moulds taken off 4 NOS $ 350
Huffaker Jensen Healey race fenders. These are light duty
moulds I intended to use for repair of like parts and to make new
ones, but never used and will never need. Will make whole
fenders mounting all the way to the bead and in the door jam.
Set (4) 14x6 Panasport Wheels 4" backspace. These are the $ 550
light wheels marked by Panasport "for racing purposes only".
Three are in very good to excellent condition. Real nice wheels. The
fourth wheel (pictured) is straight, but has a little flat spot on the very
edge where it looks like someone may have tried to bust a tire
by hand and a few scratches nearby, maybe where the threw the
same tool after banging their knuckles? :>) Bead is straight and
this is also a good wheel. 2 of these 4 wheels have 95% new 215/60
radials mounted, other two are bare.
Pair (2) 15x6 Panasport Wheels 4" backspace. These are the $ 250
light wheels marked by Panasport "for racing purposes only" Both are
in very good condition.
light wheels marked by Panasport "for racing purposes only".
Three are in very good to excellent condition. Real nice wheels. The
fourth wheel (pictured) is straight, but has a little flat spot on the very
edge where it looks like someone may have tried to bust a tire
by hand and a few scratches nearby, maybe where the threw the
same tool after banging their knuckles? :>) Bead is straight and
this is also a good wheel. 2 of these 4 wheels have 95% new 215/60
radials mounted, other two are bare.
Pair (2) 15x6 Panasport Wheels 4" backspace. These are the $ 250
light wheels marked by Panasport "for racing purposes only" Both are
in very good condition.
| |||||||||||||||||||||||||||||||||||||
Alfa Parts for sale - Race and Performance
GTA ZF posi Rare original GTA ZF positraction unit for 101/105 $ 2200
series rear axles. Includes the two special GTA axle shafts needed.
Clutches are currently set "race tight" and unit is in use.
GTA ZF posi Rare original GTA ZF positraction unit for 101/105 $ 2400
series rear axles. Includes the two special 15 spline GTA axle shafts
needed. This unit is in like new condition. Best one I have ever seen.
Bought new in the seventies and run only a few seasons behind a
low power 1300 solex.
Spare GTA ZF posi Complete GTA ZF posi and add $ 1500
one only special axle. Sold only with like unit
above. Allows spare axle to be set up for quick use.
GTA ZF posi Rare early 101/105 ZFunit like those above but uses $ 2500
fine spline axles. Posi comes with four axles . Unit has had
weld/repair to hat top but is in excellent condition. Currently set
up with 4 friction disc each side and 115 pounds preload.
Rare 4.77 competion R&P Factory competition ratio that never $ 400
came in a production Alfa. This is not a new part. It is a very rare,
usable part. You can see from the pattern that someone ran it very
briefly with the pinion gear depth shallow. Original pattern still
clearly visible and no incorrect wear. Fits early 101/105 axles.
Beck/Orion locked rear carrier Ring gear above is currently bolted $ 250
to this fully locked rear spider gear set. These are pretty nice as
rather than weld (and overheat) the spider gears together as is
customary gear, 2 valleys are just brazed full preventing the spiders
from turning. Uses std 101 style axle shafts.
GTA ZF posi Rare original GTA ZF positraction unit for 101/105 $ 2200
series rear axles. Includes the two special GTA axle shafts needed.
Clutches are currently set "race tight" and unit is in use.
GTA ZF posi Rare original GTA ZF positraction unit for 101/105 $ 2400
series rear axles. Includes the two special 15 spline GTA axle shafts
needed. This unit is in like new condition. Best one I have ever seen.
Bought new in the seventies and run only a few seasons behind a
low power 1300 solex.
Spare GTA ZF posi Complete GTA ZF posi and add $ 1500
one only special axle. Sold only with like unit
above. Allows spare axle to be set up for quick use.
GTA ZF posi Rare early 101/105 ZFunit like those above but uses $ 2500
fine spline axles. Posi comes with four axles . Unit has had
weld/repair to hat top but is in excellent condition. Currently set
up with 4 friction disc each side and 115 pounds preload.
Rare 4.77 competion R&P Factory competition ratio that never $ 400
came in a production Alfa. This is not a new part. It is a very rare,
usable part. You can see from the pattern that someone ran it very
briefly with the pinion gear depth shallow. Original pattern still
clearly visible and no incorrect wear. Fits early 101/105 axles.
Beck/Orion locked rear carrier Ring gear above is currently bolted $ 250
to this fully locked rear spider gear set. These are pretty nice as
rather than weld (and overheat) the spider gears together as is
customary gear, 2 valleys are just brazed full preventing the spiders
from turning. Uses std 101 style axle shafts.
Spridget Parts for sale - Race and Performance
Tilton Alloy flywheel assembly Tilton brand alluminum flywheel, $ 400
old style heavy duty pressure plates (2) and new clutch disc (2). Good
used condition. Reversible pressure plate shows wear but straight
surface. Ring gear very good.
Tilton Alloy flywheel assembly Tilton brand alluminum flywheel, $ 400
old style heavy duty pressure plates (2) and new clutch disc (2). Good
used condition. Reversible pressure plate shows wear but straight
surface. Ring gear very good.
| Click thumbnails for larger image Use browser back button to return to this page |
| Click thumbnails for larger image Use browser back button to return to this page |
| SOLD |
Race Parts for sale - General
Electromotive HPX direct ignition system Older Electromotive HPX $ 300
direct fire ignition module and coils. Good working condition. Would
be ideal for a racer wanting to carry a whole spare module. This is the
standard unit used on so many SCCA GTL, production, and other cars.
It has the built in soft touch rev limiter, and reostats for quick easy timing
and advance curve adjustments. No sensor (I highly recommend
Huffaker's) and no crank trigger stuff, just the unit pictured.
Electromotive HPX direct ignition system Older Electromotive HPX $ 300
direct fire ignition module and coils. Good working condition. Would
be ideal for a racer wanting to carry a whole spare module. This is the
standard unit used on so many SCCA GTL, production, and other cars.
It has the built in soft touch rev limiter, and reostats for quick easy timing
and advance curve adjustments. No sensor (I highly recommend
Huffaker's) and no crank trigger stuff, just the unit pictured.
| SOLD |
| SOLD |
| SOLD |
| Alfa race & performance - General Race - Other Makes |
HD alloy radiator for Alfa Giulietta or Alfa other 19" x 13" alloy radiator, $ 450
near new, very thick, I think 4 core. Was used in Giulietta vintage car with
big engine. More than is needed for a 1300. Near new.
Vintage American Magnesium Racing Wheels Set of 4 15x6 $2000
(Set of 8) $3000
Alfa pattern 15x6" American Racing Magnesium wheels
circa 1968-1974. Very light, very rare. Very good condition
needing cosmetic restoration only. Am I the only one who
tires of seeing Alfa race cars on panasports?
(Set of 8) $3000
Alfa pattern 15x6" American Racing Magnesium wheels
circa 1968-1974. Very light, very rare. Very good condition
needing cosmetic restoration only. Am I the only one who
tires of seeing Alfa race cars on panasports?
SOLD
SOLD
SOLD
SOLD
Complete Giulietta/Giulia Vintage race suspension kit
with rare 3 piston Girling brakes $1,500
Unrestored, but straight and solid parts from nationally
competitive Giulietta spider circa early 1980s.
Consist of the following:
-Front Springs and koni shocks
-Front swaybar
-Rear Springs and koni shocks
-Tubular adjustable rear trailing arms
-Top/third link to replace wishbone
-Adjustable panhard bar
-Bolt in jig built by Orion, bolt in panhard bar to chassis cradle and mounts
-Reinforced right and rear axle tubes with added panhard bar mounts
-Rare 101 Giulia disc brake setup (need rotors and rebuild) with
corresponding uprights, hubs and a-arms.
-3 NOS Girling caliper pistons and partial rebuild kits
This stuff was stored inside for years so needs basic paint and rubber
restoration. All nuts/bolts and fittings turned off easily, hubs turn, pistons
not stuck ect. Of course everything needs paint and inspection.
Brakes, uprights, hubs only $850
Race related susp components (everything else only) $800
with rare 3 piston Girling brakes $1,500
Unrestored, but straight and solid parts from nationally
competitive Giulietta spider circa early 1980s.
Consist of the following:
-Front Springs and koni shocks
-Front swaybar
-Rear Springs and koni shocks
-Tubular adjustable rear trailing arms
-Top/third link to replace wishbone
-Adjustable panhard bar
-Bolt in jig built by Orion, bolt in panhard bar to chassis cradle and mounts
-Reinforced right and rear axle tubes with added panhard bar mounts
-Rare 101 Giulia disc brake setup (need rotors and rebuild) with
corresponding uprights, hubs and a-arms.
-3 NOS Girling caliper pistons and partial rebuild kits
This stuff was stored inside for years so needs basic paint and rubber
restoration. All nuts/bolts and fittings turned off easily, hubs turn, pistons
not stuck ect. Of course everything needs paint and inspection.
Brakes, uprights, hubs only $850
Race related susp components (everything else only) $800
Alfa Weber Air Horn Set - Curved - New in box $275
Brand new never used Vel Stack set part # A2301000 56025
purchased new several years ago from International Auto
Complete
Brand new never used Vel Stack set part # A2301000 56025
purchased new several years ago from International Auto
Complete
SOLD
Veloce sump and pickup for early Giulietta/Giulia race cars $950
Cast alloy 2 part veloce pan and pickup as used in 101
series race car (may actually be 750 series) Fits all
Alfa 4 cylinder when used in 750/101 chassis. Has been
modified to clear late model oil pump. Overall good condition,
but windage tray will need light brazing.
Cast alloy 2 part veloce pan and pickup as used in 101
series race car (may actually be 750 series) Fits all
Alfa 4 cylinder when used in 750/101 chassis. Has been
modified to clear late model oil pump. Overall good condition,
but windage tray will need light brazing.
SOLD
| SOLD |
SOLD